The author posted a question in Auto, Moto
What options are there to protect the sill from corrosion before welding it to the car? and got a better answer
Response from
Response from 0[+++++]
paint. after installing, pressurize with rast-stop type antikor and warm up the sills with heat-jet.
paint. after installing, pressurize with rast-stop type antikor and warm up the sills with heat-jet.
Response from 0[+++++]
Drilled holes with a diameter for rubber plugs from bottles used to try these plugs in pharmacies. In the inside of the sills through the holes stuffed capron stockings and blower filled the exhaust. The car is 11 years old, but the sills are like new I drilled from the top of the sill. I drove the car straight from the showroom with a new one and put rubber plugs. Rags, that is pro oily rags in the barrel for years and the barrel does not rust. Yeah another one was suggested by a friend.
Drilled holes with a diameter for rubber plugs from bottles used to try these plugs in pharmacies. In the inside of the sills through the holes stuffed capron stockings and blower filled the exhaust. The car is 11 years old, but the sills are like new I drilled from the top of the sill. I drove the car straight from the showroom with a new one and put rubber plugs. Rags, that is pro oily rags in the barrel for years and the barrel does not rust. Yeah another one was suggested by a friend.
Response from 0[+++++]
first weld and then treat with rust preventers! If you do the opposite, they will burn out during welding and there
first weld and then treat with rust preventers! If you do the opposite, they will burn out during welding and there