how to hook up a chandelier in a new building?



The author posted a question in Family

how to hook up a chandelier in a new building? and got a better answer

Response from Антон Владимирович[+++++]

Response from 0[+++++]
Blue - common for two groups of lamps Yellow-green - ground The remaining two wires are phases for two groups of lamps

Response from 0[+++++]
This is for the two-way switch. Blue - zero brown - phase through the switch yellow green - ground not necessary

Response from 0[+++++]
Make a test strip Light bulb socket and two wires and connect the two wires to your socket in any combination of keys and you'll see what's going on.

Response from 0[+++++]
The first two answers are correct.

Response from 0[+++++]
What kind of switch is it? How many keys? On this depends on how you connect. And about the chandelier did not specify how many wires come out of it and what color?

Response from 0[+++++]
In addition to the wires, you have to decide on the mounting of the chandelier. I don't see a hook in the ceiling. If the slab is hollow, you can put a hook in. If the chandelier with a bar for mounting on dowels, you will have to think about options for the location of wiring in the ceiling, so it does not punch through a drill. If in doubt, it is better to call an electrician from the housing and see-try him in the process of installation. In any case, electrical installation requires a minimum set of knowledge of the physics of electricity and the basics of safety regulations. Start reading, look on YouTube, if you are not afraid to admit your lack of knowledge, then there is somewhere to put it Good luck.

Response from 0[+++++]
Now you have to learn.

Response from 0[++]
don't have to worry about the chandelier.

Response from 0[+++++]
Call an electrician. Spare the money?

Response from 0[+++++]
There's nothing difficult there, just twist the wires together and wrap the tape around and that's it!

 

To answer the question:

Name*

E-mail:*

Reply text:*
Verification code (enter 22):*